← All guides

Pool payout schemes explained: PPS, FPPS, PPS+ and PPLNS

Strategy · 9 min read

The pool-vs-solo guide on this site covers whether to join a pool at all. This guide covers the next question, the one pool signup pages bury in a dropdown: how the pool pays. Four abbreviations. PPS, FPPS, PPS+ and PPLNS, decide who absorbs the pool's bad luck, who keeps the transaction fees inside each block, and how badly a machine that stops overnight gets punished. Nothing here is financial advice; it is the mechanics, plus a way to check that a pool pays the way it claims to.

A share is a share: what the scheme can and cannot change

Start with the fact the marketing leaves out. A share is proof that a miner did a unit of work, and in expectation that work is worth the same at every pool. As one current comparison puts it, expected income barely depends on the scheme: a given hashrate carries the same expectation everywhere, and the scheme redistributes the timing of the money and decides where transaction fees end up. F2Pool's own documentation says the same thing from the other side: probabilistically, the mining rewards of PPLNS and PPS are expected to be the same.

So a payout scheme is not a raise. It is a risk-and-timing contract with three moving parts. First, variance: does the pool pay a fixed rate per share out of its reserves, or does the miner only get paid when the pool actually finds a block? Second, transaction fees: each block contains fees paid by users, and schemes differ on whether those fees are kept by the pool, estimated and folded into the share price, or split in some hybrid way. Third, the fee the pool charges for all of this, which, as the next sections show, cannot be compared across schemes at face value.

The four schemes that matter, in plain terms

PPS (pay per share) is the original contract: the pool pays a fixed amount for every accepted share, whether or not it finds a block that day. The pool carries all the luck, so PPS historically carried the highest fees, and on the classic form the pool kept the transaction fees. Most major pools no longer offer basic PPS for Bitcoin; the hybrids below replaced it because they handle the block subsidy and the transaction fees separately.

FPPS (full pay per share) keeps the fixed per-share payment and adds the fees. F2Pool's documentation defines it as an extension of PPS that includes the mining fee rewards, calculated from the total network mining fees divided by the total coinbase rewards of the past day. In other words, the fee part of the payout is an estimate, a recent average, smoothed into the share price, not the actual fees in any specific block. The pool still carries the variance, and now also the estimation risk, which is why FPPS is usually the highest-fee option a pool offers.

PPS+ splits the difference. Per F2Pool's definition, the fixed block rewards are paid with PPS, while the transaction fees the pool has actually mined are distributed with PPLNS. The stable part stays stable; the volatile part varies. That hybrid exists because transaction fees are volatile and harder to predict, which makes guaranteeing them expensive for the pool.

PPLNS (pay per last N shares) pays only when the pool finds a block, splitting the block's actual contents, subsidy plus real fees, across the shares in a recent window. There is no reserve smoothing anything: a lucky week pays well, a dry spell pays nothing, and the miner carries the variance the FPPS pool would have absorbed. Two older relatives still appear on smaller pools: PROP, a simple proportion per round that is highly variable and vulnerable to pool hopping, and the newer TIDES, which pays on blocks over a difficulty-sized window with coinbase payout. Recognise the names; the four above are the real choice.

The comparison that matters: effective take, not headline fee

Here is the trap. A 2% fee and a 4% fee are not comparable until the transaction-fee treatment is equalised, because a scheme that keeps the fees can cost more than a scheme that charges more and passes them through. The cleanest illustration uses one pool's own published terms, checked 2026-10-18: on F2Pool, Bitcoin FPPS is listed at a 4% fee and PPLNS at 2%. The 2-point gap is the price of the pool absorbing all variance and estimating the fee component, it is insurance pricing, not a rip-off or a bargain by itself.

SchemePaid forWho carries pool luckTransaction feesF2Pool BTC fee (official page, 2026-10-18)
PPSEach accepted sharePoolKept by pool (classic form)Not offered for BTC
FPPSEach accepted sharePoolEstimated average, folded into share price4%
PPS+Shares for subsidy; blocks for feesSharedActual fees, split PPLNS-styleNot listed for BTC
PPLNSBlocks, across the last-N windowMinerActual fees in each block found2%

Two cautions belong beside any such table. Fees vary widely across pools, one industry guide puts FPPS anywhere from 0% to 4% depending on the pool and the miner's scale, and secondary sources disagree with primary ones: a recent academy article states F2Pool's FPPS fee as approximately 2.5%, while F2Pool's own help centre says 4%. Believe the pool's own current page, not a comparison site, and re-check it before switching. Also count stale shares: work submitted too late to count earns nothing under any scheme, and one analysis notes that a pool advertising 1% fees with 2% stale shares effectively charges 3%. The rejection rate on the pool dashboard is part of the fee, whatever the scheme is called.

The part-time miner problem: windows and downtime

PPLNS has a second cost that headline comparisons skip, and it falls hardest on home miners. Because payment is calculated across the last N shares when a block lands, shares age out of the window. A machine that runs around the clock keeps the window full of its own shares. A machine that stops every night, for noise, heat, or time-of-use electricity pricing, watches its older shares fall out of the window while it is off, then has to refill the window when it restarts before its share of the next block is back to full strength. The expected value of the work is unchanged over a long enough run, but the miner experiences it as a permanent ramp-up discount that a 24/7 operator never pays.

This is why current guidance ties PPLNS to uptime: it suits miners running at 95% uptime or better who can tolerate payout variance in exchange for lower fees. A miner on a timer, or one machine in a garage that gets switched off when guests visit, is the profile FPPS pricing exists for, the higher fee buys out of both the luck variance and the window effect. Neither answer is wrong; matching the scheme to the duty cycle is the decision.

Thresholds: the quiet term in the contract

Every pool also sets a minimum payout threshold, and for a small miner it can matter as much as the scheme. F2Pool's default Bitcoin threshold is 0.005 BTC, and the threshold can be changed in the account settings. One dated calculation (2026-08-14, at 100 TH/s) put a 0.005 BTC threshold at roughly 107 days to fill and a 0.001 BTC threshold at roughly 21 days, the exact numbers move with difficulty and price, but the shape of the problem does not: a high default threshold on a small hashrate means months of earnings sit in the pool's custody before the first payout. Lower the threshold to the pool's minimum sensible setting once the payout address has been proven with a first small payout, and remember that the same per-share rate applies to one machine as to a farm, small miners are not paid a worse rate, they just wait longer at a badly set threshold.

Audit your own payouts: a five-step monthly check

A scheme is a claim. Once a month, spend ten minutes checking the claim against the pool's own records:

  1. Record the terms. Open the pool's official payout page and note the scheme, the stated fee, and the payout threshold currently set on the account. Screenshot or save the page; terms change.
  2. Pull the month's accepted shares and rejection rate from the pool dashboard. A rising rejection rate is a hidden fee increase under every scheme.
  3. Total the month's payouts from the pool's payout history and confirm each one on-chain at the wallet address.
  4. Compare the shape, not just the sum. On FPPS or PPS, payouts should arrive on the pool's schedule at a steady rate per share, block or no block. On PPLNS, payouts should cluster around blocks the pool found and pause in dry spells. A PPLNS account paying suspiciously flat, or an FPPS account that stalls whenever the pool is unlucky, is not running the scheme on the label.
  5. Check the fee arithmetic. Divide total payouts by the gross value the dashboard reports for the same shares. The result should sit within a point of the stated fee once stale shares are accounted for. A persistent gap larger than that is a question for the pool's support, with the saved terms page from step 1 attached.

What success looks like: the payout pattern matches the scheme's signature, the effective take matches the stated fee plus the measured rejection rate, and every payout above the threshold is visible on-chain. Anything else has a specific, documented discrepancy to raise, not a feeling that the pool pays badly.

Choosing: a short decision framework

Run three questions in order. Uptime: does the machine run 95%+ of the time? If not, the PPLNS window taxes every restart, start with FPPS. Cash-flow need: must mining income land on a schedule (a hosting bill, a loan payment)? If yes, pay for variance absorption. If the income is irregular anyway, PPLNS's lower fee compounds quietly. Fee reality: compare pools on effective take from the pool's own page, stated fee, fee treatment, threshold, and measured rejection rate, never on a comparison site's headline number. Change one variable at a time and give any new scheme a full month before judging it; variance makes a week of PPLNS data nearly meaningless.

FAQ

Does PPLNS pay more than FPPS in the end? In expectation, no, the schemes are expected to pay the same for the same work. PPLNS usually charges a lower fee, which is a real saving, and the miner repays it by carrying variance and the window effect. Over a long, high-uptime run the fee saving is the whole difference.

Why do secondary sites list different fees for the same pool? Fees change, tiers differ by scale, and some articles simply go stale. The pool's own help or terms page is the only figure worth acting on, the 2.5% versus 4% FPPS disagreement for the same pool is a worked example of why.

Can a small miner switch schemes without switching pools? Often yes: larger pools offer more than one scheme on the same account. F2Pool lists both FPPS and PPLNS for Bitcoin, so the scheme decision and the pool decision can be made separately.

Background: Pool vs solo mining →